VDA QMC LICENC TRAINING
QFD TRAINING
VDA QMC licenc training
IATF 16949
VDA 6.X
Quality methods
TISAX
Automotive SPICE
MMOG/LE
(ID 211-SR) IATF 16949 - Qualification for 1st/2nd Party Auditors
Na ovoj trodnevnoj obuci, upoznaćete se sa zahtevima dva standarda, IATF 16949 i DIN EN ISO 9001, dobićete informacije o tome kako da ih tumačite i šta morate da preduzmete da uspešno implementirate ove zahteve u svojoj organizaciji.
(ID 240-SR) IATF 16949 – Workshop for Re-Qualification as 1st/2ndParty Auditors
This workshop focusses on the exchange of experiences and updating the knowledge and abilities of auditors. The main focus is on the contents of DIN EN ISO 19011 and IATF 16949, their requirements including SIs and FAQs, as well as typical areas that often offer potential in implementation. In addition, participants discuss their experiences and issues regarding the implementation of IATF 16949 in a moderated discussion.
(ID 250-SR) IATF 16949 – 1st/2nd party Auditor – Examination
Sertifikat koji vam se dodeljuje nakon polaganja ispita za sertifikovanog 1st/2nd-party auditora IATF 16949 izdaje isključivo član IATF VDA QMC ili jedan od naših odobrenih licenciranih partnera.
Sertifikat potvrđuje da ste sposobni da samostalno sprovodite IATF sisteme audita interno i na lokaciji vaših dobavljača.
Sertifikat potvrđuje da ste sposobni da samostalno sprovodite IATF sisteme audita interno i na lokaciji vaših dobavljača.
(ID 255-SR) IATF 16949 – 1st/2nd party Auditors – Examination for Re-Qualification
According to DIN EN ISO 19011, auditors are required to continuously improve their competence, for example through self-study or professional development. For this reason, the validity of the certificates is deliberately limited in time.
Through this examination with final certification, you can have your competencies confirmed again by an independent party, thus providing evidence of an up-to-date and valid qualification.
Through this examination with final certification, you can have your competencies confirmed again by an independent party, thus providing evidence of an up-to-date and valid qualification.
(ID 311-SR) Auditor training according to VDA 6.1 (1st/2nd/3rd Party)
In this training, you will learn the skills you need to imple-ment and verify the requirements of the VDA 6.1 standard as an auditor. The following questions, among others, will be addressed:
(ID 312-SR) VDA 6.2 - Qualification for 1st/2nd/3rd Party Auditor
This training will provide you with the specialist knowledge of the VDA 6.2 standard. You will learn the skills you need to implement and verify the requirements of the VDA 6.2 stan-dard as an auditor.
(ID 318-SR) VDA 6.5 Qualification for Product Auditor
Da li proizvodi nude kvalitet koji kupci očekuju? To je centralno pitanje u svim auditu proizvoda. U automobilskoj industriji, auditi su već mnogo godina nezamenljiv alat za procenu i poboljšanje kvaliteta proizvoda. Standard VDA 6.5 je vodič za izradu programa audita i planova audita, kao i za sprovođenje audita, izveštavanje i upravljanje merama.
Na ovoj jednodnevnoj obuci, naučićete kako da kreirate efikasne auditne programe, razvijete ciljne auditne planove, sprovedete audit proizvoda i procenite kvalitet proizvoda sa odgovarajućom klasifikacijom grešaka. Dokumentovani rezultati audita čine osnovu za kontinuirano poboljšanje kvaliteta proizvoda.
Na ovoj jednodnevnoj obuci, naučićete kako da kreirate efikasne auditne programe, razvijete ciljne auditne planove, sprovedete audit proizvoda i procenite kvalitet proizvoda sa odgovarajućom klasifikacijom grešaka. Dokumentovani rezultati audita čine osnovu za kontinuirano poboljšanje kvaliteta proizvoda.
(ID 319-SR) VDA 6.7 – Process Auditor for Production Equipment – Qualification
In manufacturing, there is an increasing demand for customized products in small quantities. No order is like the other and change requests from the customers during current production is not uncommon. Products and processes need to be constantly re-thought, calculated, constructed, machines retooled and workers re-trained. This is where the VDA Standard 6.7 comes in: with process audits for individual production and workshop production, customer requirements can be met optimally. More stable processes are achieved, and error costs and material waste are minimized. You will acquire the necessary competencies in this training.
(ID 333-SR) Obuka za nadogradnju iz VDA 6.3:2016 u VDA 6.3:2023
Ova obuka za nadogradnju pokriva izmene u VDA 6.3 (izdanje iz 2016.) uključujući ažuriranja upitnika, promene u evaluaciji, promene u potencijalnoj analizi i druge prilagodbe.
(ID 341-SR) VDA 6.3 - Workshop for Certified Process Auditors
Comprehensive knowledge is required to be able to perform VDA 6.3 process audits. After successful completion of the qualification as VDA 6.3 process auditor, the question arises of continuous further development. Again and again, while conducting audits in practice, auditors will encounter situations in which handling or appropriately assessing requirements leads to uncertainties.
This training offers the opportunity to discuss such situations from your everyday auditing work and to determine the appropriateness and applications of requirements and assessments. You can strengthen and develop your competence as a process auditor. In this way, you will increase your confidence in the application of process audits and receive suggestions for further personal development.
This training offers the opportunity to discuss such situations from your everyday auditing work and to determine the appropriateness and applications of requirements and assessments. You can strengthen and develop your competence as a process auditor. In this way, you will increase your confidence in the application of process audits and receive suggestions for further personal development.
(ID 352-SR) VDA 6.2 – Examination for 1st / 2nd or 3rd Party Auditor
Well-trained auditors are needed for inhouse implementation and for the certification process in accordance with VDA 6.2.
(ID 381-SR) VDA 6.3:2023 - Kvalifikacija Procesnog Auditora
VDA 6.3 procesni audit je delotvoran postupak za ocenjivanje procesa u vezi sa planiranjem i proizvodnjom proizvoda. Ovi auditi se obično sprovode unutar organizacije ili sa dobavljačima pre serijskog puštanja u proizvodnju, ali takođe predstavljaju dragocen doprinos optimizaciji procesa unutar već postojećih proizvodnih linija. Pored toga, potencijalna analiza – kao deo VDA 6.3 – takođe je dokazan metod za odabir novih dobavljača. Ovaj standard procesnog audita može se primeniti i na druge sektore kao što su mašinstvo i vetroenergija.
Za sprovođenje VDA 6.3 procesnih audita potrebni su sveobuhvatno znanje, iskustvo i kompetencija. Stoga je kvalifikacija relevantnog osoblja neophodna. Ova obuka vam pruža osnove za obavljanje procesnih audita prema VDA 6.3, uzimajući u obzir procesno orijentisan pristup i zahteve specifične za klijente za sveobuhvatnu primenu u automobilskoj industriji.
Za sprovođenje VDA 6.3 procesnih audita potrebni su sveobuhvatno znanje, iskustvo i kompetencija. Stoga je kvalifikacija relevantnog osoblja neophodna. Ova obuka vam pruža osnove za obavljanje procesnih audita prema VDA 6.3, uzimajući u obzir procesno orijentisan pristup i zahteve specifične za klijente za sveobuhvatnu primenu u automobilskoj industriji.
(ID 382-SR) VDA 6.3:2023 – Procesni Auditor Ispit za Sertifikaciju
Ovaj jednodnevni ispit namenjen je osoblju za upravljanje kvalitetom koje je zaduženo za sprovođenje procesnih audita u svojim organizacijama (interno) ili u lancu snabdevanja (eksterno), kao i spoljnim auditorima (angažovanim kao pružaoci usluga).
(ID 386-SR) Extension of VDA 6.3 Process Auditor qualification
VDA 6.3 procesna provera je efikasan postupak za ocenjivanje procesa u vezi sa planiranjem i proizvodnjom proizvoda. Da bi se sprovela VDA 6.3 procesna provera, neophodno je opsežno znanje, iskustvo i kompetencija. Stoga je kvalifikacija relevantnog osoblja neophodna. Prema ISO 19011, od audita se zahteva da kontinuirano unapređuju svoju kompetenciju. Ovo uključuje profesionalno usavršavanje, na primer, putem samostalnog učenja i obuka. Validnost sertifikata je namerno ograničenog trajanja, kako bi auditorima bilo omogućeno da prođu dodatnu obuku kako bi održali svoju kvalifikaciju.
(ID 961-SR) VDA 6.8 – Аудитор процеса – Квалификација
Ova obuka vam pruža osnove za sprovođenje procesnih audita u lancu snabdevanja u skladu sa VDA 6.8, uzimajući u obzir proces-orijentisani pristup i zahteve specifične za kupca za sveobuhvatno primenjivanje u automobilskoj industriji.
(ID 383-SR) Automotive Software Essentials
Software is an essential part of vehicles today. Like other parts and components, it is therefore subject to high quality requirements. On the one hand, the software manufacturing process is fundamentally no different from other manufacturing processes: products are developed, tested, released, and approved based on specific requirements. However, a closer look reveals significant differences to the hardware process. For example, it is easier to parallelize production steps, changes can be implemented much faster and, what’s more, software specialists have developed their own technical terms and their own agile way of managing projects.
(ID 409-SR) Problem Solving in 8 Disciplines (8D) – Basics
This training focuses on the basic principles of problem solving in 8 disciplines. You will learn how to proceed systematically when a problem (e.g. a customer complaint) occurs (de-scribing and resolving a problem), how the problem solving process works, and what an 8D report contains.
(ID 410-SR) VDA 2 - Production Process and Product Approval (PPA)
VDA Volume 2 “Quality Assurance for Supplies” describes the basic requirements for sampling of serial parts submission for automotive serial parts. This ensures that the customer’s expectations are understood and implemented by the supplier so that the product can be manufactured to maximum customer satisfaction. In this training, you will become familiar with and learn to apply the VDA standard.
(ID 411-SR) VDA 16 – Decorative Surfaces of Accessories and Functional Parts in the Exterior and Interior Areas of Automobiles
Surface specifications based on look and feel play an important role in the product engineering process (PeP) and the entire supply chain. Surface specifications that are defined too late or not in line with the process can lead to considerable expense. The training will focus on the systematic procedure for defining specifications for different features of decorative surfaces that are dependent on look and feel.
(ID 415-SR) Automotive Core Tools (ACT) for Quality Management in the Automotive Industry
Successful project work requires knowledge of planning processes and methods, along with an understanding of how the methods are related. You will become familiar with the basic tools of quality management and learn how to apply them in an efficient and targeted manner. The training provides an overview of the current status and application of the Core Tools in the automotive and supply industry, with the aim of improving relations with customers and suppliers, ensuring high process and product quality, solving problems that occur systematically, and avoiding the repetition of faults. The options for use are discussed in detail. So the Automotive Core Tools are tried-and-tested methods required in quality planning and steering. They include tools such as advance quality planning (maturity level assurance and advance product quality planning), Failure Mode and Effects Analysis (FMEA), Measurement System Analysis (VDA 5 and MSA), Production Part Approval Process (PPAP), VDA 2 and Production Process and Product Approval, Statistical Process Control (SPC) and the 8D method.
(ID 417-SR) Automotive Core Tools for Process and System Auditors
Kako bi se osigurala visoka početna kvaliteta audita u kompanijama i celokupnom lancu snabdevanja, neophodne su odgovarajuće kompetencije u korišćenju odgovarajućih metoda. Efikasan pristup tokom audita predstavlja važan faktor uspeha. Ova obuka će vam pružiti priliku da razvijete svoje veštine u obavljanju tipičnih audit situacija u okviru oblasti Automobilske osnovne alatke.
(ID 419-SR) Problem Solving in 8 Disciplines (8D) – User Training
This training explains the extensive use of problem solving in eight disciplines with the appropriate supporting quality tools. You will acquire the skills you need to consistently apply the specific problem solving tools and to lead problem solving teams to successful conclusions. The training also covers the VDA handbook Standardized Process for Handling Customer Complaints and how it connects and dovetails with the problem solving process. Assessments, maturity levels, roles, responsibilities and team dynamics, plus motivation, leadership and a culture of dealing with faults, also form part of this training.
(ID 430-SR) Electrical Overstress (EOS) in the Automotive Industry
The VDA volume EOS in the automotive industry provides a way to handle failures that show signs of electronic overload.
(ID 442-SR) FMEA – Basic Training Harmonised AIAG-VDA FMEA
The basic training introduces you to the FMEA standard as published jointly by VDA QMC and AIAG in June 2019. It serves to prevent defects and increase technical safety. In the
(ID 444-SR) Special Characteristics in the Product Engineering Process (PEP)
Special Characteristics are product and/or process characteristics that may have an impact on the functional safety (operational safety and safety in use), compliance with official regulations, function, performance, ft, appearance or further processing of the product. Special Characteristics are a mandatory requirement for companies in the automotive industry resulting, among other things, from IATF 16949. The VDA volume Process Description Special Characteristics explains the recommended procedure for this. The training will examine in detail the motivation as well as the meaningful identification, definition, tracking and documentation of Special Characteristics.
(ID 471-SR) VDA 5 – Measurement and Test Processes. Suitability, Planning, Management
Several standards and guidelines exist that spell out the requirements for identifying and handling uncertainties in measurement and testing processes. Companies face many issues in this area, particularly in the organization and certification of their quality management systems.
The training explains how to determine the suitability of measurement and testing processes, and how testing processes are planned and carried out. Here product development is integrated into the testing process. The program highlights the fluid borders between the related processes of test equipment management, test planning and test process management (incl. the defined roles). It also focuses on protecting against the risks associated with measurement and testing processes. This two-day seminar covers all the topics surrounding measurement systems, measuring processes and testing processes.
The training explains how to determine the suitability of measurement and testing processes, and how testing processes are planned and carried out. Here product development is integrated into the testing process. The program highlights the fluid borders between the related processes of test equipment management, test planning and test process management (incl. the defined roles). It also focuses on protecting against the risks associated with measurement and testing processes. This two-day seminar covers all the topics surrounding measurement systems, measuring processes and testing processes.
(ID 502-SR) Conformity of Production (CoP)
Ensuring product conformity in series production is becoming an increasingly important component of production, especially in terms of approvals. In order to achieve this, compliance with the legal regulations in series production is mandatory, which is regularly checked by various state or licensing authorities.
(ID 503-SR) Product Safety & Conformity Representative (PSCR)
Svaka kompanija u automobilskoj industriji mora da obezbedi bezbednost i usklađenost svojih proizvoda. To znači da moraju da se pridržavaju zakonskih propisa u svim relevantnim zemljama i da zadovolje bezbednosna očekivanja šire javnosti – što je zadatak predstavnika za bezbednost proizvoda i usklađenost (PSCR). Ova obuka će vam pružiti stručnost potrebnu za profesionalno i ciljno obavljanje svakodnevnih zadataka PSCR-a. Program pokriva centralne teme integriteta proizvoda i OTA (over-the-air) ažuriranja softvera i proširuje vašu kompetenciju u tim oblastima.
(ID 534-SR) Product Compliance System – Basics
The safety of products and their compliance with legal as well as voluntarily assumed obligations are the primary goals of all companies in the automotive industry. However, achieving these goals is becoming increasingly challenging – diversified markets, product variations, and complex supply chains make the requirements unclear.
The risk involved is enormous: if product safety and compliance are not ensured, it can threaten the existence of the entire company. Each market player should therefore address these challenges not only in terms of individual products but systematically at the organizational level – with a Product Compliance System.
Such a system includes elements for the identification, monitoring, control, and minimization of product compliance-related risks at the company level. This allows potential dangers to be identified and prevented early on.
In this training, you will learn about the seven building blocks that make up a Product Compliance System. Practical examples will help you gain understanding on how to apply these at your company.
The risk involved is enormous: if product safety and compliance are not ensured, it can threaten the existence of the entire company. Each market player should therefore address these challenges not only in terms of individual products but systematically at the organizational level – with a Product Compliance System.
Such a system includes elements for the identification, monitoring, control, and minimization of product compliance-related risks at the company level. This allows potential dangers to be identified and prevented early on.
In this training, you will learn about the seven building blocks that make up a Product Compliance System. Practical examples will help you gain understanding on how to apply these at your company.
(ID 602-SR) Maturity Level Assurance for New Parts
The implementation of the VDA standard of Maturity Level Assurance for New Parts aims to attain sustainable improvement of the quality of supplied parts. With this method, a process accompanying assurance of product maturity is achieved at the start of production: projects are segmented, assessed early on and corrected. Furthermore, a unified concept is provided for cooperation and communication in complex product engineering projects involving many participants in the supply chain. In the training, you will acquire the necessary knowledge and competencies to implement the standard in the automotive and supplier industry.
(ID 632-SR) VDA Field Failure Analysis for Users
Uprkos povećanim naporima u razvojnim i proizvodnim procesima sa ciljem da se kupcima obezbedi zreo, robustan i usklađen proizvod, odstupanja od očekivanog stanja mogu se pojaviti tokom korišćenja na terenu. U zavisnosti od tipa reklamacije, potencijalno neispravni delovi ili automobilske komponente se zamenjuju i mogu biti zatraženi na analizu od strane proizvođača (OEM) ili dobavljača preko OEM-a. VDA Priručnik za analizu kvarova na terenu pruža sveobuhvatan pristup identifikaciji uzroka. Ova obuka vas upoznaje sa sadržajem aktuelnog standarda. Pored toga, steći ćete neophodne kompetencije za primenu metodologije analize kvarova na terenu u vašoj organizaciji.
(ID 634-SR) VDA SQE – Supplier Quality Engineer – Basics
Due to increasing globalization and a consistent trend towards outsourcing services and products, automotive suppliers play an ever larger role. The increasing requirements and changes in procurement bring opportunities, but also challenges, making strategic supplier management essential. As a consequence the parties involved must reassign their roles and tasks: Purchasing has long been about more than just sourcing goods and reducing costs, but now it is responsible for a supplier network that must be controlled.
In this three-day training the participants can develop competencies in implementing a comprehensive and efficient supplier management.
In this three-day training the participants can develop competencies in implementing a comprehensive and efficient supplier management.
(ID 973-SR) VDA 19.1 – Skilled Assistant for Technical Cleanliness
Obuka ima za cilj kvalifikaciju zaposlenih u automobilskoj industriji, dobavljačima ili servisnim radnicima koji sprovode inspekcije čistoće. Preneseno znanje i uvid u laboratorijsku praksu takođe predstavljaju vredne alate za sve koji se svakodnevno susreću sa kvalitetnim faktorom tehničke čistoće u svom radu, kao što su inženjeri, zaposleni u obezbeđenju kvaliteta, tehničkom nabavkom i prodajnim sektorima. Zbog sličnih zahteva za čistoću u sektorima kao što su vazduhoplovstvo, hidraulika i precizna inženjering industrija, ova obuka je takođe pogodna za osoblje iz ovih oblasti.
(ID 974-SR) VDA 19.2 Technical Cleanliness in Assembly - Skilled Assistant Training
Tehnička čistoća komponenti i sklopova je važna funkcionalna karakteristika kvaliteta u proizvodnji modernih vozila. Izdanje 19.1, „Inspekcija tehničke čistoće – Čestice zagađenja funkcionalno relevantnih automobilskih komponenti“, kao prvi sveobuhvatan standardni tekst, bavi se procedurama za karakterizaciju stanja čistoće proizvoda u automobilskoj kvalitetnoj lančanoj proizvodnji. Crveno izdanje VDA 19.1 (ranije poznat kao VDA 19) prvi put je zvanično uveden od strane VDA u januaru 2005. godine, a dostupan je u potpuno revidiranom i proširenom izdanju od 2015. godine. Ova dvodnevna obuka „VDA 19.1 Stručni asistent“ omogućava učesnicima da projektuju i dokumentuju analize čistoće prema VDA 19.1 i pruža uvid u laboratorijsku praksu kao i opremu i metode koje se tamo primenjuju. Takođe, objašnjava se pozadina tehničke potrebe za inspekcijama čistoće i ponašanja u vezi sa čistoćom.
(ID 510-SR) TISAX - Are you secure? Implementing VDA ISA in your own company - For a Successful TISAX Assessment
Zaštita poslovnih procesa i informacija, čak i pod teškim uslovima, centralni je zadatak korporativnog menadžmenta. TISAX model (Trusted Information Security Assessment Exchange) razvijen je u tu svrhu pod okriljem VDA. TISAX olakšava međuinstitucionalno priznavanje procena informacione bezbednosti i stvara zajednički standard za testiranje i razmenu u tu svrhu. Zasnovan je na VDA proceni informacione bezbednosti (VDA ISA), upitniku koji se može koristiti za samoocenjivanje, ali takođe služi kao osnova za izdavanje TISAX oznake od strane provajdera usluga testiranja.
Na dvodnevnoj obuci, naučićete kako da implementirate mere za uspešnu TISAX procenu u svojoj kompaniji koristeći neke od ključnih zahteva VDA ISA kao primere. Takođe, dobićete pregled strukture i sadržaja kataloga zahteva.
Na dvodnevnoj obuci, naučićete kako da implementirate mere za uspešnu TISAX procenu u svojoj kompaniji koristeći neke od ključnih zahteva VDA ISA kao primere. Takođe, dobićete pregled strukture i sadržaja kataloga zahteva.
(ID 515-SR) Introduction to Automotive SPICE® 4.0
The ISO/IEC 330xx series – called SPICE (Software Process Improvement and Capability Determination) – is the successor of ISO/IEC 15504 and thus a widely used and accepted standard for assessing and improving software engineering processes. Worldwide and especially by the automotive industry in Germany. Automotive SPICE® has been available since 2006. It is an assessment model compliant with ISO/IEC 330xx and adapted to the needs of the automotive industry. Since 2007, Automotive SPICE® is the yardstick for the development of software systems for automotive suppliers and a permanent feature of the OEMs’ supplier assessment. This two-day training imparts a substantia understanding of Automotive SPICE® based on ISO/IEC 330xx.
(ID 960-SR) Global MMOG/LE
The Global Materials Management Operations Guideline / Logistics Evaluation (Global MMOG/LE) is an established industry standard that provides a unified assessment procedure for evaluating automotive logistics suppliers. The tool enables OEMs and suppliers to assess the logistical performance capabilities of the (sub)suppliers and the internal processes. It focuses on the following aspects:
QFD training
Auditor trainings
TISAX
Management Systems
Quality methods
Customer Specific Requirement
IATF 16949
Soft Skill Trainings
(ID 3101-SR) ISO 9001 Certified Internal Auditor (Quality Management System Training)
Upon successful completion of the course, the participant will be prepared to carry out internal audits of the management system according to ISO 9001 within their organization and/or supplier audits at their organization's suppliers. In addition to gaining an understanding of the requirements of the ISO 9001 standard, participants will learn how to recognize discrepancies between requirements and practices within the organization, how to gather evidence of compliance or non-compliance, how to inform management of audit results, and how to verify the effectiveness of corrective actions taken based on the audit.
(ID 3102-SR) ISO 14001 Environmental management system internal auditor training
By successfully completing the course, the participant will be prepared to conduct internal audits of the environmental management system according to ISO 14001 within their organization. In addition to understanding the requirements of the ISO 14001 standard, participants will learn how to identify discrepancies between requirements and practice within the organization, how to gather evidence of compliance or non-compliance, how to inform leaders of audit results, and how to verify the effectiveness of measures taken based on audit findings.
(ID 3103-SR) ISO 45001 Occupational health and safety management system internal auditor training
The assessment of companies increasingly depends on how they take care of their employees' health and physical well-being. The European Union also has expectations regarding workplace health and safety. The Occupational Health and Safety Management System (OHSMS) is a tool for the organization's management to meet these expectations in a transparent and organized manner.
(ID 3105-SR) ISO/IEC 17025 internal auditor training on laboratory management system
The ISO/IEC 17025 standard defines general requirements for testing and calibration laboratories. The standard is applicable to all organizations that carry out tests and/or calibrations and can be used to develop the management system of laboratories. Accreditation bodies use this standard to confirm or recognize the prepardness of laboratories.
(ID 3107-SR) ISO 50001 Energy management system internal auditor training
Upon successful completion of the course, participants will be able to perform internal audits of the energy management system according to MSZ EN ISO 50001 within their organization. In addition to understanding the requirements of the MSZ EN ISO 50001 standard, participants will learn how to identify deviations between requirements and actual practices within the organization, how to gather evidence of compliance or non-compliance, how to inform management of audit results, and how to verify the effectiveness of actions taken based on the audit.
(ID 3120-SR) ISO/IEC 17025 standard guide
During the training, the requirements and operational practices of the ISO/IEC 17025 standard are explained from the point of view of quality management. The training also serves as a guide to the process of obtaining accreditation.
(ID 3121-SR) ISO/IEC 17025 standard knowledge update
During the training, the requirements of the ISO/IEC 17025 standard are explained as an update. Before the training, it is possible to ask the trainer 3 questions, which will be included in the training material. In this way, those standard elements that are the most questionable are specifically highlighted. The questions asked are integrated into the 3rd content element.
(ID 3104-SR) TISAX + ISO 27001:2022 internal auditor training
The reliability and security of information fundamentally affect the operation, processes, effectiveness, efficiency, and profitability of an organization.
(ID 3112-SR) TISAX internal auditor training
The reliability and security of information fundamentally affect the functioning of an organization, its processes, effectiveness, efficiency, profitability, etc.
(ID 3113-SR) TISAX initial self assessment workshop
The reliability and security of information fundamentally affect the functioning of an organization, its processes, effectiveness, efficiency, profitability, etc.
(ID 3114-SR) TISAX - introduction to VDA ISA requrements
The reliability and security of information fundamentally affect the functioning of an organization, its processes, effectiveness, efficiency, profitability, etc.
(ID 3109-SR) ISO 19011 Guidelines For Auditing Management Systems
The participants of the training receive guidance on how to manage an audit program, how to plan, execute, evaluate, document, and close out a specific audit. We also practice these skills with smaller examples. Additionally, during the training, we discuss the necessary competencies required for first and second-party auditors, how to maintain, evaluate, and improve them.
(ID 3110-SR) ISO 45001:2018 standard introduction training
During the one-day ISO 45001:2018 standard awareness training, participants can learn about the structure of the new standard, key definitions, and interpret the key requirements, with particular emphasis on the new or changed requirements compared to OHSAS 18001. All of this is done so that they can interpret and apply the ISO 45001 standard requirements within their own organizational context.
(ID 3203-SR) ISO 9001 standard introduction training
We designed the training to help participants understand the structure and logic of management systems, how to analyze and understand the organization's environment and stakeholders' needs. We placed special emphasis on understanding the process approach and risk-based thinking, as well as the importance of "regulatory cycles" for continuous improvement in the organization. The training is conducted by trainers who themselves have professional experience in the private sector, sometimes as full-time quality management professionals or ISO 9001 auditors.
(ID 5010-SR) VDA 1 – Documentation and Archiving
An organization needs to preserve its records for various reasons (audit, product recalls, product liability, regulatory requirements) in order to demonstrate the effectiveness of its quality management system and the conformity of its products.
(ID 3301-SR) SPC - Statistical process control
At our Practice-oriented Statistical Process Control (SPC) training, you will learn about the characteristic properties and distributions of processes, as well as the distinguishing features of controlled and uncontrolled processes. You will also learn how to correctly execute process capability tests and understand the relationship between capability indices and the amount of defective items produced in the process. Understanding the properties of processes will help both developers in determining feasible tolerances and production and quality assurance in exploring development opportunities within the process. Industrial experience shows that the use of resources and materials in production processes is often wasteful because organizations do not or only partially apply acquired knowledge to practice.
(ID 3302-SR) MSA - Measurement System Analysis
We recommend this practice-oriented course for those whose task is to design, select, procure, and accept measuring instruments and measuring systems, including the supervision and calibration of instruments. It is also suitable for those who work for companies that manufacture measuring and testing equipment, as well as those involved in product design and tolerance determination.
(ID 3303-SR) APQP - Advanced Product Quality Planning
The training presents the quality planning process and the development of a control plan as described in the APQP and Control Plan manual issued by AIAG. This method is widely accepted in the automotive industry.
(ID 3304-SR) PPAP - Production Part Approval Process
The training outlines the product approval process described in the PPAP manual issued by AIAG.
TARGET AUDIENCE OF THE TRAINING:
Employees of various departments within organizations who are responsible for approving their own and purchased products and processes, and approving suppliers.
TRAINING OBJECTIVES:
Participants will become familiar with the triggers for product approval according to PPAP, the relevant requirements, proper application for their own and purchased products, and documentation requirements.
TRAINING CONTENT:
- Overview of relevant legal and regulatory requirements (e.g. IMDS, REACH, etc.)
- Overview of the structure of the PPAP publication
- Process of product and process approval and sampling
- Reasons for sampling
- Levels of sampling according to PPAP
- Content requirements for different levels of sampling
- Validation and verification of processes
- Regulation of product and process approval
PARTICIPATION REQUIREMENTS:
Knowledge of various methods such as FMEA, SPC,...
(ID 3306-SR) 5 Whys Method
The 5 Why's is one of the simplest and most commonly used root cause analysis methods that effectively identifies the causes of simpler problems.
(ID 3308-SR) AIAG Control Plan
This training covers the preparation of a control plan as described in the Control Plan manual published by AIAG. Control plans include the operational details we need to keep our manufacturing processes running efficiently and play a role in the success of other tools such as FMEA and SPC.
(ID 3309-SR) IQ FMEA Training and Workshop
The APIS company's IQ-FMEA software was developed in accordance with the Failure Mode and Effects Analysis (FMEA) approach of the German Automotive Industry Association (VDA). This software is not only one of the most widely used FMEA-supporting applications among German automotive suppliers, but also globally.
(ID 3311-SR) MSA basic training
We recommend this practice-oriented course for those who are tasked with the application of measuring instruments and measuring systems.
(ID 3401-SR) Product Liability
We have designed the training to provide participants with an understanding of the most important laws related to product liability, their practical operation, and to assist them in meeting the requirements and avoiding negative consequences. The Product Liability Act applies only to products intended for consumers, while product safety regulations apply to all products.
(ID 3513-SR) Product Failure and Reliability Analysis
The aim of the training is to familiarize the participants with the characteristics of product lifespan during usage, the important metrics related to product lifespan, and the probability distributions used to describe them. Additionally, participants will learn about the fundamental concepts of warranty and guarantee, and how to estimate the quantity and costs of future complaints based on statistical processing of past warranty claims data.
(ID 3601-SR) LEAN Administrator
We recommend this course to anyone who wants to learn the basics of the LEAN philosophy and who participates in LEAN projects at their company. Participants of the training have the opportunity to attend the LEAN Project Manager training, which provides a higher level of knowledge and enables participants to manage LEAN projects.
(ID 3602-SR) LEAN Project Manager
We recommend this course to professionals who have a basic understanding of LEAN principles and who want to delve deeper into the intricacies of LEAN production beyond the fundamentals. The course is designed to include homework assignments following the basic training, as well as an exam task after the course to prepare participants for practical application of their acquired knowledge.
(ID 6020-SR) Maturity Level Assurance for New Parts - Workshop
The implementation of the VDA standard of Maturity Level Assurance for New Parts aims to attain sustainable improvement of the quality of supplied parts. With this method, a process accompanying assurance of product maturity is achieved at the start of production: projects are segmented, assessed early on and corrected. Furthermore, a unifed concept is provided for cooperation and communication in complex product engineering projects involving many participants in the supply chain. In the workshop, you will acquire the necessary knowledge and competencies to implement the standard in the automotive and supplier industry. This is a supplementary workshop for ID 602-EN 1 day training.
(ID 3501-SR) Ford Customer Specific Requirements Change
KEY PARTICIPANTS ON WORKSHOP:
All of participants in Supply Chain, who should be affected by FORD Customer Specification Requirements.
All of participants in Supply Chain, who should be affected by FORD Customer Specification Requirements.
(ID 3502-SR) Ford Motor Company Customer Specific Requirements
We recommend this training course to current or future Ford suppliers who want to understand the deeper connections of Ford's requirements and need to meet the Ford Q1 requirements. The training is provided by instructors who are currently full-time automotive industry professionals and not only know but also apply Ford's customer-specific requirements on a daily basis.
(ID 3503-SR) Mercedes-Benz Group Customer Specific Requirements
This course is recommended for current or future Daimler suppliers who want to understand the deeper implications of Daimler's customer-specific requirements and who must meet the requirements of the Mercedes-Benz Special Terms. The training is delivered by instructors who are still full-time automotive professionals, not only familiar with, but also applying Mercedes-Benz's customer-specific requirements on a daily basis.
(ID 3504-SR) BMW Group Customer Specific Requirements
We recommend this course to current or future BMW suppliers who want to understand the deeper connections of BMW's requirements and who need to meet BMW's requirements. The training is conducted by instructors who are currently full-time automotive professionals and not only know but also apply BMW's customer-specific requirements on a daily basis.
(ID 3505-SR) Renault Group Customer Specific Requirements
We recommend this training course to current or prospective Renault or Nissan suppliers who want to gain a deeper understanding of the Renault Group's requirements and who need to meet the Renault Group's requirements.
(ID 3510-SR) FORMEL Q - VOLKSWAGEN Customer Specific Requirements
The Volkswagen Group has a wide range of requirements for its suppliers, so that by complying with these requirements the appropriate product production process and the production and delivery of products can be ensured.
(ID 3514-SR) BMW Requalification Workshop
We recommend this workshop to current or prospective BMW suppliers who want to understand the deeper context of BMW requirements and need to meet BMW's requirements. The workshop is conducted by instructors who are currently full-time automotive industry professionals and not only have knowledge but also apply BMW's customer-specific requirements on a daily basis.
(ID 3515-SR) Renault Group Supplier Requirements Upgrade
Be among the first to be informed about the mandatory changes applicable to current or prospective Renault and/or Nissan suppliers.
(ID 3516-SR) Volkswagen self-audit workshop
This course is recommended for current VW suppliers, as the completion of the annual self-audit is a crucial customer-specific requirement.
(ID 3701-SR) Automotive Process Approach - workshop
Although the process approach (process approach, Prozessansatz) has been introduced in the ISO 9001 standard since 2000, in practice, only a small proportion of organizations apply it to this day, risking the missed opportunity of potential savings that could come from its application. In the automotive industry, its application is mandatory for organizations certified according to IATF 16949, for which the IATF has developed the so-called automotive process approach. Participants will learn this method through practical examples.
(ID 3812-SR) IATF 16949 HR requirements
Availability of competent employees is one of, if not the most important factors in the success of an organization. Accordingly, the latest edition of IATF 16949, released in 2016, places particular emphasis on defining and ensuring resources, including human resources. Part of this process is defining competencies and ensuring their presence. Our training assists HR professionals and employers in implementing these requirements into practice.
(ID 3813-SR) Supplier Management Workshop
The 2016 edition of the IATF 16949 standard has significantly expanded requirements for external-sourced products, services, and processes. Therefore, in our workshop, we assist colleagues working in supplier management in implementing these requirements into practice.
(ID 3803-SR) Stress management
By mastering basic techniques, this training helps to alleviate and prevent stress.
TARGET AUDIENCE
Any person who is open to developing and maintaining inner harmony based on self-awareness.
TRAINING OBJECTIVES
After completing the course, participants will be able to identify and apply their own stress management techniques based on their personal development.
TRAINING CONTENTS
Knowledge about stress management
- Stress prevention strategies (FLOW consciousness, Eisenhower matrix, saying "no")
- Stress management options (physical activity, self-expression in art, hobbies, psychofitness (laughter, jogging, relaxation), relaxation, meditation, holidays and rituals, other joy-producing activities)
- Developed skills and abilities
- Experiencing and applying at least three stress-reducing and/or stress-management techniques.
PARTICIPATION REQUIREMENTS
None.
(ID 3804-SR) Motivation Mastery Course
The training facilitates the conscious application of the motivational cycle through an approach based on the needs and interests (curiosity) of motivation.
(ID 3806-SR) Effective Presentation
The training introduces the basics of public speaking and presentation tool usage.
TARGET GROUP OF THE TRAINING
Any person who presents information or messages to a group verbally as part of their work.
TRAINING OBJECTIVE
After completing the training, participants are able to use their communication channels and available tools more consciously within presentation situations.
TRAINING CONTENT
- Knowledge related to presentations:
- Correct functioning of verbal and non-verbal communication in presentation situations
- Elements of presentation structure and their application
- Use of presentation space and tools
- Management of the audience
- Developed skills and abilities:
- Self-awareness
- Conscious communication (verbal, vocal, body language)
- Attention-grabbing and retention
- Persuasion, message delivery
- Formation of presentation structure
- Tool usage (e.g. PowerPoint, presenter)
- Group management
PARTICIPATION REQUIREMENTS
None
(ID 3807-SR) Successful Negotiation
The training introduces participants to the management of personal negotiation situations aimed at asserting interests, whether inside or outside the company.